Internet On Your Neo FreeRunner (USB Networking)

Jump to: navigation, search

@@ Line 5: / Line 5: @@
 == Connect the Openmoko ==
-=== With the network manager ===
+The first thing to do is to create an alias for the IP address of the Neo FreeRunner.
-The easiest way to set up the connection with the Openmoko is to create a new connection (called Openmoko here) for the wired networks. For this connection, you choose a static (manual) IP address '''192.168.0.200'''.
+* Edit the file /etc/hosts by adding the line:
+.168.0.202 openmoko
+Note : The alias "openmoko" can be replaced by any other name at the will of the user.
-[[File:Screenshot-Editing Openmoko.png|100px]]
+Then, we must set up the connection.
+=== With the network manager ===
+The easiest way to set up the connection with the Openmoko is to create a new connection (called Openmoko here) for the wired networks. For this connection, you choose a static (manual) IP address '''192.168.0.200'''.
+[[File:Screenshot-Editing Openmoko.png|350px]]
 === Without the network manager ===
+* Edit the file '''/etc/network/interfaces''' by adding the following lines:
+ # The Openmoko network interface
+ auto eth1
+ iface eth1 inet static
+ address 192.168.0.200
+ netmask 255.255.255.0
+* Reboot the network service by running the following command:
+ /etc/init.d/networking restart
 == Configuration IP tables ==

Revision as of 17:11, 11 March 2011